How We Repair Your Dryer
Dryers tumble clothes with a drum, belt and motor while a gas burner or electric element heats air that leaves through the vent.
Safety first: A clogged dryer vent is a fire risk. If clothes come out very hot or the room smells scorched, stop using the dryer.
Common Dryer Problems We Fix
Takes too long to dry
A restricted vent, a clogged lint duct, a weak element or a moisture sensor that needs cleaning.
Drum will not turn
A broken drive belt, a failed idler pulley or motor.
Squeaking or thumping
Worn drum rollers, idler pulley or glides.
Shuts off early
A dirty moisture sensor or an overheating cycling thermostat.
Will not start
A door switch, a thermal fuse or a start switch.
No heat
On electric dryers, a burned-out element or a blown thermal fuse; on gas dryers, a weak igniter or failed gas valve coils. A clogged vent is often the root cause.
Quick Checks Before You Call
These are safe for most owners and sometimes solve the problem without a visit:
- Clean the lint screen and the lint duct below it.
- Disconnect and clear the vent hose; check the outdoor flap opens when the dryer runs.
- Electric dryers need both breakers on: no heat can be a half-tripped breaker.
- Wipe the metal moisture sensor bars inside the drum.
Still not working? Call (844) 442-1500 or try our troubleshooting wizard.
Our 5-Step Repair Process
- Call or book onlineTell us what your dryer is doing and when it started. We schedule the first available visit.
- DiagnosisThe technician checks power, controls and the parts most likely to fail, using the model's service data and test modes.
- Upfront quoteYou get the cause, the repair and the price before any work starts. If repair does not make sense, we tell you.
- RepairWe install original or equivalent parts matched to your model and clean up when we are done.
- Test and warrantyWe run the appliance through a full cycle to confirm the fix. The repair is covered by our 90-day parts and labor warranty.
Parts We Replace Most Often
- Heating element
- Thermal fuse and thermostats
- Gas igniter and valve coils
- Drive belt
- Drum rollers and idler pulley
- Moisture sensor
- Door switch
Cost and Lifespan
Most dryer repairs cost $120–$350 including parts and labor, and these appliances typically last 10–13 years. These are national estimates: your exact price comes after the diagnosis. Use the repair vs replace calculator to compare.
Keep It Running Longer
- Have the full vent run cleaned yearly
- Use rigid or semi-rigid metal vent duct
- Clean the lint screen every load
Dryer Repair in Palm City, FL
We repair dryers in Palm City (ZIP codes 34990 and 34991) and in nearby communities including Stuart, Jensen Beach and Hobe Sound. Long, humid summers in Florida push refrigerators, ice makers and AC units in Palm City hard for most of the year.
Frequently Asked Questions
How much does Dryer Repair cost in Palm City, FL?
Most dryer repairs fall between $120–$350 including parts and labor. The final price depends on the part that failed and your model. You get an exact quote after the diagnosis and before any work starts.
Can you repair my dryer today?
Same-day visits depend on technician availability in Palm City. Call (844) 442-1500 early in the day for the best chance of a same-day or next-day appointment.
Is the repair guaranteed?
Yes. Parts and labor are covered by our 90-day warranty. If the same problem comes back within that time, we return and fix it.
Which brands of dryer do you repair?
We repair all major brands. See the brand list on this page, or call with your model number and we will confirm.
Should I repair or replace my dryer?
A dryer typically lasts about 10 to 13 years. If yours is well inside that range and the repair costs less than half the price of a new one, repairing usually makes sense. Near the end of its life, or when the repair costs more than half of a replacement, replacing is often the better value. We give you an honest opinion either way.